Elladur™ 4850 Polyaspartic SS (Part A) Custom Color Not available. Liquid. US / Canada: (800) 424-9300 Mexico: SETIQ 800-00-214-00 / 55-5559-1588 Available 24 hours and 365 days a year SAFETY DATA SHEET Product name Other means of identification Product type Emergency telephone number of the company Section 1. Identification::::Elladur™ Deco Flake SB. A fast-curing flooring system with a decorative mosaic finish. A mosaic pattern floor covering, wherein a single broadcast of decorative vinyl flakes is incorporated into a pigmented polyaspartic coating and sealed with a clear, high gloss, polyaspartic finish. The innovative base chemistry provides for fast-cure ...When Elladur 5 is over-worked or applied too thick, micro-bubbling can occur. This will appear as a haze on clear Elladur 5 coats. Optional Cove: Elladur 5 may be applied as a "painted on" cove. Tape off a straight cove line, apply a coat of primer and allow to cure. Then, apply a basecoat and broadcast desired decorative aggregate or fl akes.Elladur™ 4850. A two-component, slower-set, high-solids resin utilizing polyaspartic technology. 5900F Blended Color Estes Quartz Broadcast Aggregate. Blended color quartz aggregate used in various flooring systems. 5900F Solid Color Estes Quartz Broadcast Aggregate. Solid color quartz ...Elladur 4850 is ideal for use in various coating applications where fast cure to service is desired. • Acceptable for use in high performance architectural applications • Suitable for use in USDA inspected facilities • Suitable for use in Canadian food processing facilities • Food & Beverage (e.g., processing areas, bathrooms, locker2. Apply Elladur 4850 at spread rate of 106-162 sq. ft. per gallon to yield 10-15 mils WFT using a squeegee. Back roll with a non shedding 3/8" or lower nap roller. Note: Use dip and roll method in hot and humid conditions. Moisture in the air will accelerate the cure time. Do not exceed 10 minutes between batch to batch mixes to avoid changes at1-2 cts Elladur 4850 6.0-15.0 (150-375) *Resuprime 3579 must be abraded if Elladur 4850 has not been applied within the PDS specifi ed recoat window. Use 60-80 grit paper/screen. **Resufl or 3746 must be abraded if Elladur 4850 has not been applied within the PDS specifi ed recoat window. Use 60-80 grit paper/screen. O 1 # $ 1 (-& I-%. …Elladur 4850 is ideal for use in various coating applications where fast cure to service is desired. • Acceptable for use in high performance architectural applications • Suitable for use in USDA inspected facilities • Suitable for use in Canadian food processing facilities • Food & Beverage (e.g., processing areas, bathrooms, locker1-2 cts Elladur 4850 6.0-15.0 (150-375) *Resuprime 3579 must be abraded if Elladur 4850 has not been applied within the PDS specifi ed recoat window. Use 60-80 grit paper/screen. **Resufl or 3746 must be abraded if Elladur 4850 has not been applied within the PDS specifi ed recoat window. Use 60-80 grit paper/screen. O 1 # $ 1 (-& I-%. …Elladur™ 4850 Polyaspartic SS (Part B) Hardener Not available. Liquid. US / Canada: (800) 424-9300 Mexico: SETIQ 800-00-214-00 / 55-5559-1588 Available 24 hours and 365 days a year SAFETY DATA SHEET Product name Other means of identification Product type Emergency telephone number of the company Section 1. Identification::::Elladur 4850 is ideal for use in various coating applications where fast cure to service is desired. Acceptable for use in high performance architectural applications. Suitable for …Elladur 4850 polyaspartic technology off ers a durable coating with excellent ultraviolet and weathering characteristics, as well as good chemical resistance that will cure at low temperatures. Elladur 4850 is ideal for use in various coating applications where fast cure to service is desired.Elladur™ 4850. A two-component, slower-set, high-solids resin utilizing polyaspartic technology. This slower-set coating gives applicators greater flexibility for flooring applications in a variety of markets. The improved flow and leveling characteristics of Elladur™ 4850 Polyaspartic Floor Coating SS further minimize the potential for roller marks, enabling applicaElladur™ 4850. A two-component, slower-set, high-solids resin utilizing polyaspartic technology. This slower-set coating gives applicators greater flexibility for flooring applications in a variety of markets. The improved flow and leveling characteristics of Elladur 4850 Polyaspartic Floor Coating SS further minimize the potential for roller marks, enabling applicators to create aElladur 4850 polyaspartic technology off ers a durable coating with excellent ultraviolet and weathering characteristics, as well as good chemical resistance that will cure at low temperatures. Elladur 4850 is ideal for use in various coating applications where fast cure to service is desired.Elladur 4850 Abrasion Resistance, mg loss, Taber Abraser (CS-17 Taber Abrasion Wheel, 1,000 gram load, 1,000 revolutions), ASTM D4060: 80 m/g loss. Adhesion, ASTM D 4541: 425 psi.2. Apply Elladur 4850 at spread rate of 106-162 sq. ft. per gallon to yield 10-15 mils WFT using a squeegee. Back roll with a non shedding 3/8" or lower nap roller. Note: Use dip and roll method in hot and humid conditions. Moisture in the air will accelerate the cure time. Do not exceed 10 minutes between batch to batch mixes to avoid changes atElladur 4850 polyaspartic technology off ers a durable coating with excellent ultraviolet and weathering characteristics, as well as good chemical resistance that will cure at low temperatures. Elladur 4850 is ideal for use in various coating applications where fast cure to service is desired.2. Apply Elladur 4850 at spread rate of 106-162 sq. ft. per gallon to yield 10-15 mils WFT using a squeegee. Back roll with a non shedding 3/8" or lower nap roller. Note: Use dip and roll method in hot and humid conditions. Moisture in the air will accelerate the cure time. Do not exceed 10 minutes between batch to batch mixes to avoid changes at3:00 pm Step 4- The topcoat of Elladur 4850 was applied by squeegee and back roll. After the topcoat was applied, they were able to resume foot traffic to the area in just 6 hours and they resumed ...Elladur™ 4850 Polyaspartic SS (Part A), Clear MANUFACTURER'S NAME THE SHERWIN-WILLIAMS COMPANY 101 W. Prospect Avenue Cleveland, OH 44115 This document includes all data required by 40 CFR 63.801(a) for a Certified Product Data Sheet under criteria specified in 40 CFR 63.805(a).Elladur™ 4850 Polyaspartic SS (Part A) Custom Color Not available. Liquid. US / Canada: (800) 424-9300 Mexico: SETIQ 800-00-214-00 / 55-5559-1588 Available 24 hours and 365 days a year SAFETY DATA SHEET Product name Other means of identification Product type Emergency telephoneElladur 4850 is ideal for use in various coating applications where fast cure to service is desired. • Acceptable for use in high performance architectural applications • Suitable for use in USDA inspected facilities • Suitable for use in Canadian food processing facilities • Food & Beverage (e.g., processing areas, bathrooms, lockerUsername = Personal Sherwin email address. Password = mySherwin password. If you have forgotten your password, see the Reset DWID Password Procedure . For account …Available in clear and standard packaged colors, GP4850 Polyaspartic Floor Coating minimize potential for roller marks. Providing 15 to 20 minutes setting time, GP4850 offers low-temperature cure, mechanical strength and chemical resistance. Having 6 to 36 hours recoat window, product provides improved flow and leveling characteristics.Jul 28, 2021 · The 4850 is a slower-set coating that provides higher levels of flexibility while creating a very smooth finish. The other type of coating used, the Elladur 4844 is used for fast-set conditions and allows for increased durability with chemical, ultraviolet, and weathering protection.Polyaspartic finishes do cost about 20 percent more than epoxies. Some companies sell polyaspartics by the gallon; Sherwin-Williams’ Elladur Floor Coating is part of its Industrial product line. More resistant to UV exposure, polyaspartic coatings hold color better than epoxy coatings and will not yellow.Elladur 4850 polyaspartic technology off ers a durable coating with excellent ultraviolet and weathering characteristics, as well as good chemical resistance that will cure at low temperatures. Elladur 4850 is ideal for use in various coating applications where fast cure to service is desired.RSL Elladur SF - Special Colours. Elladur SF is a high-build, Polyaspartic/Polyurea fast-cure floor coating system designed to create an advanced, tough and durable gloss finish in a range of thicknesses. Professional use only - from the 24th August 2023, adequate training is required before industrial or professional use of this product.Elladur™ 4850. A two-component, slower-set, high-solids resin utilizing polyaspartic technology. 6755D 1/16" Solid Color Estes Flakes. 1/16" solid color vinyl paint flakes for decorative flooring applications. 6750D 1/16" Solid …Elladur™ 4850 Polyaspartic SS (Part A), Clear MANUFACTURER'S NAME THE SHERWIN-WILLIAMS COMPANY 101 W. Prospect Avenue Cleveland, OH 44115 This document includes all data required by 40 CFR 63.801(a) for a Certified Product Data Sheet under criteria specified in 40 CFR 63.805(a).Elladur 4850 is ideal for use in various coating applications where fast cure to service is desired. • Acceptable for use in high performance architectural applications • Suitable for use in USDA inspected facilities • Suitable for use in Canadian food processing facilities • Food & Beverage (e.g., processing areas, bathrooms, lockerThe Insider Trading Activity of Ciongoli Adam G. on Markets Insider. Indices Commodities Currencies StocksElladur™ 4850 Polyaspartic SS (Part B) Hardener Not available. Liquid. US / Canada: (800) 424-9300 Mexico: SETIQ 800-00-214-00 / 55-5559-1588 Available 24 hours and 365 days a year SAFETY DATA SHEET Product name Other means of identification Product type Emergency telephone number of the companyAnyway I recommend Heavy shield or solvent based H&C for the quick and dirty or Tile-clad for that industrial finish. Tile-clad is great, gave to a couple of mechanic shops, barber shops and garages for our more premium home owner and all of them love it. 3746, flakes if they want, AS HS Poly clear coat.1-2 cts Elladur 4850 6.0-15.0 (150-375) *Resuprime 3579 must be abraded if Elladur 4850 has not been applied within the PDS specifi ed recoat window. Use 60-80 grit paper/screen. **Resufl or 3746 must be abraded if Elladur 4850 has not been applied within the PDS specifi ed recoat window. Use 60-80 grit paper/screen. O 1 # $ 1 (-& I-%. …Description. Elladur Topcoat is a high build, polyaspartic/polyurea fast-cure floor coating system based on advanced materials, designed to provide a tough and durable gloss finish in a variety of thicknesses. Elladur Topcoat is light stable with good chemical resistance which can be applied to a variety of finishes and surfaces.Elladur 4850 polyaspartic technology off ers a durable coating with excellent ultraviolet and weathering characteristics, as well as good chemical resistance that will cure at low temperatures. Elladur 4850 is ideal for use in various coating applications where fast cure to service is desired.Winter is back, and it's colder than ever. Coupled with snow, dry air, sickness, and everything else that comes with winter, it's shaping up to be pretty rough. Here are 10 ways to...1-2 cts Elladur 4850 6.0-15.0 (150-375) *Resuprime 3579 must be abraded if Elladur 4850 has not been applied within the PDS specifi ed recoat window. Use 60-80 grit paper/screen. **Resufl or 3746 must be abraded if Elladur 4850 has not been applied within the PDS specifi ed recoat window. Use 60-80 grit paper/screen. O 1 # $ 1 (-& I …Elladur™ 4850. A two-component, slower-set, high-solids resin utilizing polyaspartic technology. This slower-set coating gives applicators greater flexibility for flooring applications in a variety of markets. The improved flow and leveling characteristics of Elladur™ 4850 Polyaspartic Floor Coating SS further minimize the potential for roller marks, enabling applicaAnyway I recommend Heavy shield or solvent based H&C for the quick and dirty or Tile-clad for that industrial finish. Tile-clad is great, gave to a couple of mechanic shops, barber shops and garages for our more premium home owner and all of them love it. 3746, flakes if they want, AS HS Poly clear coat.Swedish retailers H&M and AB Lindex and Denmark’s IC Companys have ceased production of angora products in response to a PETA campaign showing videos of rabbits at angora farms in ...Elladur™ 4850 Polyaspartic SS (Part A) Custom Color Not available. Liquid. US / Canada: (800) 424-9300 Mexico: SETIQ 800-00-214-00 / 55-5559-1588 Available 24 hours and 365 days a year SAFETY DATA SHEET Product name Other means of identification Product type Emergency telephone number of the company Section 1. Identification::::Elladur™ 4850. A two-component, slower-set, high-solids resin utilizing polyaspartic technology. 5900F Blended Color Estes Quartz Broadcast Aggregate. Blended color quartz aggregate used in various flooring systems. 5900F Solid Color Estes Quartz Broadcast Aggregate. Solid color ...ISHARES MSCI TOTAL INTERNATIONAL INDEX FUND CLASS K- Performance charts including intraday, historical charts and prices and keydata. Indices Commodities Currencies StocksSimply apply the polyaspartic coating overnight, and the floor will be dry and ready to use by the morning. The high level of protection afforded by polyaspartics, in conjunction with their exceptionally fast dry time, make them an ideal choice for many concrete sealing situations. Our Take: One of the best polyaspartics is Polyaspartic 745 ...Simply apply the polyaspartic coating overnight, and the floor will be dry and ready to use by the morning. The high level of protection afforded by polyaspartics, in conjunction with their exceptionally fast dry time, make them an ideal choice for many concrete sealing situations. Our Take: One of the best polyaspartics is Polyaspartic 745 ...Elladur 4850 Abrasion Resistance, mg loss, Taber Abraser (CS-17 Taber Abrasion Wheel, 1,000 gram load, 1,000 revolutions), ASTM D4060: 80 m/g loss. Adhesion, ASTM D 4541: 425 psi.Elladur 4850; Resuflor 3505; Resuflor 3741; Resuflor 3746; Resutile 4638; Resuflor Performance HTS; Resuflor Performance HPS; Resutile Aqua 4410 (formerly AquArmor WBU) Resutile Aqua 4411 (formerly AquArmor WBU Flat - CLEAR) DECORATIVE SYSTEMS. Resuflor Terrazzo TG; Resuflor Deco Flake BC; Resuflor Deco Quartz BC23; Resuflor Screed Deco Flake ...This slower-set coating gives applicators greater flexibility for flooring applications in a variety of markets. The improved flow and leveling characteristics of Elladur™ 4850 Polyaspartic Floor Coating SS further minimize the potential for roller marks, enabling applicators to create a uniform, smooth finish - even on larger floors.2. Apply Elladur 4850 at spread rate of 106-162 sq. ft. per gallon to yield 10-15 mils WFT using a squeegee. Back roll with a non shedding 3/8" or lower nap roller. Note: Use dip and roll method in hot and humid conditions. Moisture in the air will accelerate the cure time. Do not exceed 10 minutes between batch to batch mixes to avoid changes atFather's Day has a financial adviser thinking about important lessons to be passing along. By clicking "TRY IT", I agree to receive newsletters and promotions from Money and its pa...The Elladur™4850 is a two-component system consisting of a Part A and Part B which have the following corresponding US GHS Classifications for its specific formulation. Part A and Part B must be combined before using with a mix ratio of 2:1. Product Name SW REX Series US GHS Product Classification Elladur™ 4850 – Part A GP4850A01 SKIN ...Elladur is a game-changing new product range from flooring technology experts Resin Surfaces Ltd (RSL).Contact us for more information on ELLADUR: ...SAFETY DATA SHEET. Elladur™ 4850 Polyaspartic SS (Part A) Clear Not available. Liquid. US / Canada: (800) 424-9300 Mexico: SETIQ 800-00-214-00 / 55-5559-1588 Available 24 hours and 365 days a year. SAFETY DATA SHEET. Product name Other means of identification Product type Emergency telephone number of the company. …1-2 cts Elladur 4850 6.0-15.0 (150-375) *Resuprime 3579 must be abraded if Elladur 4850 has not been applied within the PDS specifi ed recoat window. Use 60-80 grit paper/screen. **Resufl or 3746 must be abraded if Elladur 4850 has not been applied within the PDS specifi ed recoat window. Use 60-80 grit paper/screen. O 1 # $ 1 (-& I-%. …PRIMER — ELLADUR 4850 MIXING AND APPLICATION 1. Add 2 parts 4850A (resin) to 1 part 4850B (hardener) by volume. Mix with low-speed drill and Jiffy ® blade for three …Elladur 4850 is primarily designed as a high-solids resin flooring solution utilizing polyaspartic technology, offering durability, excellent UV and weather resistance, and good chemical resistance. While its specifications focus on flooring applications, its qualities suggest it could also perform well on walls, especially in environments where durability …Elladur 4850 is ideal for use in various coating applications where fast cure to service is desired. • Acceptable for use in high performance architectural applications • Suitable for use in USDA inspected facilities • Suitable for use in Canadian food processing facilities • Food & Beverage (e.g., processing areas, bathrooms, lockerElladur™ 4850 Polyaspartic SS (Part A) Pewter Not available. Liquid. US / Canada: (800) 424-9300 Mexico: SETIQ 800-00-214-00 / 55-5559-1588 Available 24 hours and 365 days a year SAFETY DATA SHEET Product name Other means of identification Product type Emergency telephone number of the company Section 1. Identification::::Elladur 4850 polyaspartic technology off ers a durable coating with excellent ultraviolet and weathering characteristics, as well as good chemical resistance that will cure at low temperatures. Elladur 4850 is ideal for use in various coating applications where fast cure to service is desired.Elladur 4850; Resuflor 3746 STANDARD 2023 Colors; Resuflor Performance HTS - 4" x 6" Resutile Aqua 4410; Resutile Aqua 4411; Resuflor STANDARD Colors; ... Elladur Deco Flake; Resuflor Deco Flake DQF; ELASTOMERIC DECKING SYSTEMS. RESUDECK III; RESUDECK IV; FasTop SYSTEMS. FasTop Deco Flake SL45; FasTop HD 3.0; FasTop …Elladur™ 4850 Polyaspartic SS (Part A) Steel Gray Not available. Liquid. US / Canada: (800) 424-9300 Mexico: SETIQ 800-00-214-00 / 55-5559-1588 Available 24 hours and 365 days a year SAFETY DATA SHEET Product name Other means of identification Product type Emergency telephoneElladur™ 4850 Polyaspartic SS (Part B) Hardener Not available. Liquid. US / Canada: (800) 424-9300 Mexico: SETIQ 800-00-214-00 / 55-5559-1588 Available 24 hours and 365 days a year SAFETY DATA SHEET Product name Other means of identification Product type Emergency telephone number of the company Section 1. Identification::::2. Apply Elladur 4850 at spread rate of 106-162 sq. ft. per gallon to yield 10-15 mils WFT using a squeegee. Back roll with a non shedding 3/8" or lower nap roller. Note: Use dip and roll method in hot and humid conditions. Moisture in the air will accelerate the cure time. Do not exceed 10 minutes between batch to batch mixes to avoid changes atLearn about the benefits of epoxy flooring for your garage and how to choose the right coating. Sherwin-Williams Elladur 4850 is a slower-set coating that provides flexibility and smooth finish for your floor.2. Apply Elladur 4850 at spread rate of 106-162 sq. ft. per gallon to yield 10-15 mils WFT using a squeegee. Back roll with a non shedding 3/8" or lower nap roller. Note: Use dip and roll method in hot and humid conditions. Moisture in the air will accelerate the cure time. Do not exceed 10 minutes between batch to batch mixes to avoid changes atElladur 4850 is ideal for use in various coating applications where fast cure to service is desired. • Acceptable for use in high performance architectural applications • Suitable for use in USDA inspected facilities • Suitable for use in Canadian food processing facilities • Food & Beverage (e.g., processing areas, bathrooms, locker2. Apply Elladur 4850 at spread rate of 106-162 sq. ft. per gallon to yield 10-15 mils WFT using a squeegee. Back roll with a non shedding 3/8" or lower nap roller. Note: Use dip and roll method in hot and humid conditions. Moisture in the air will accelerate the cure time. Do not exceed 10 minutes between batch to batch mixes to avoid changes atElladur 4850 polyaspartic technology off ers a durable coating with excellent ultraviolet and weathering characteristics, as well as good chemical resistance that will cure at low temperatures. Elladur 4850 is ideal for use in various coating applications where fast cure to service is desired.Description of the Elladur™ 4850 product line: The Elladur™4850 is a two-component system consisting of a Part A and Part B which have the following corresponding US GHS Classifications for its specific formulation. Part A and Part B must be combined before using with a mix ratio of 2:1. Product Name SW REX Series US GHS Product ClassificationWhen Elladur 5 is over-worked or applied too thick, micro-bubbling can occur. This will appear as a haze on clear Elladur 5 coats. Optional Cove: Elladur 5 may be applied as a "painted on" cove. Tape off a straight cove line, apply a coat of primer and allow to cure. Then, apply a basecoat and broadcast desired decorative aggregate or fl akes.2. Apply Elladur 4850 at spread rate of 106-162 sq. ft. per gallon to yield 10-15 mils WFT using a squeegee. Back roll with a non shedding 3/8" or lower nap roller. Note: Use dip and roll method in hot and humid conditions. Moisture in the air will accelerate the cure time. Do not exceed 10 minutes between batch to batch mixes to avoid changes atElladur 4850 Abrasion Resistance, mg loss, Taber Abraser (CS-17 Taber Abrasion Wheel, 1,000 gram load, 1,000 revolutions), ASTM D4060: 80 m/g loss. Adhesion, ASTM D 4541: 425 psi.1-2 cts Elladur 4850 6.0-15.0 (150-375) *Resuprime 3579 must be abraded if Elladur 4850 has not been applied within the PDS specifi ed recoat window. Use 60-80 grit paper/screen. **Resufl or 3746 must be abraded if Elladur 4850 has not been applied within the PDS specifi ed recoat window. Use 60-80 grit paper/screen. O 1 # $ 1 (-& I-%. …Description of the Elladur™ 4850 product line: The Elladur™4850 is a two-component system consisting of a Part A and Part B which have the following corresponding US …Elladur 4850; Resuflor 3746 STANDARD 2023 Colors; Resuflor Performance HTS - 4" x 6" Resutile Aqua 4410; Resutile Aqua 4411; Resuflor STANDARD Colors; ... Elladur Deco Flake; Resuflor Deco Flake DQF; ELASTOMERIC DECKING SYSTEMS. RESUDECK III; RESUDECK IV; FasTop SYSTEMS. FasTop Deco Flake SL45; FasTop HD 3.0; FasTop …Elladur™ Deco Quartz DB. A decorative, fast-turnaround flooring system with a double broadcast of colored quartz. ... Elladur™ 4850. A two-component, slower-set, high-solids resin utilizing polyaspartic technology. Close. Proceed to Checkout Continue Shopping.2. Apply Elladur 4850 at spread rate of 106-162 sq. ft. per gallon to yield 10-15 mils WFT using a squeegee. Back roll with a non shedding 3/8" or lower nap roller. Note: Use dip and roll method in hot and humid conditions. Moisture in the air will accelerate the cure time. Do not exceed 10 minutes between batch to batch mixes to avoid changes at2. Apply Elladur 4850 at spread rate of 106-162 sq. ft. per gallon to yield 10-15 mils WFT using a squeegee. Back roll with a non shedding 3/8" or lower nap roller. Note: Use dip and roll method in hot and humid conditions. Moisture in the air will accelerate the cure time. Do not exceed 10 minutes between batch to batch mixes to avoid changes atPolyaspartic Coatings – Pros. Temperature resistant – performs at -30° Fahrenheit to +140° Fahrenheit. Fast curing – five times faster than epoxy. UV-resistant – polyaspartics are non-yellowing and do not fade or peel with sun exposure. Stain-resistant – protective layer resists stains and is easy to clean.2. Apply Elladur 4850 at spread rate of 106-162 sq. ft. per gallon to yield 10-15 mils WFT using a squeegee. Back roll with a non shedding 3/8" or lower nap roller. Note: Use dip and roll method in hot and humid conditions. Moisture in the air will accelerate the cure time. Do not exceed 10 minutes between batch to batch mixes to avoid changes at. Imagine yourself unable to see well enough to drive, and how that wou2. Apply Elladur 4850 at spread rate of Elladur™ Deco Quartz DB. A decorative, fast-turnaround flooring system with a double broadcast of colored quartz. Fast-curing polyaspartic resin is combined with a double … Skin tags are common, benign skin growth Elladur 4850; Resuflor 3505; Resuflor 3741; Resuflor 3746; Resutile 4638; Resuflor Performance HTS; Resuflor Performance HPS; Resutile Aqua 4410 (formerly AquArmor WBU) Resutile Aqua 4411 (formerly AquArmor WBU Flat - CLEAR) DECORATIVE SYSTEMS. Resuflor Terrazzo TG; Resuflor Deco Flake BC; Resuflor Deco Quartz … 1-2 cts Elladur 4850 6.0-15.0 (150-375) *Resuprime 3579 must be abrade...
Continue Reading